Installation guide

Installation
Microwave Oveo
Step 6
Assemble
trim Mt
frame
• Assemble top,
bottom and side
trims with four
screws D, as
illustrated.
When assembled,
top, bottom aird side
strips must be flush.
Note: Bottom trim has ahinge
notchand is not
interchangablewith top trim.
Screw . . TopTrim
%,:..
/ /
_t
o Screw
/
SideTrim
Screw
/
Screw D
Step 7
Install
trim Mt
frame
Caution: Donot overtighten
screws; doing so could cause
misalignment of top and side
strips,
Wall Installation
Mark
Mark
[rim Kit Frame
Mark
" Mark
Screw C
• Use the assembled fl'ame as a temtalate.
Insert the fl'ame into the cut-out and locate
the attaching holes.
• Temporarily hold the fl'ame in place by
starting the fotlr screws that attach the fl'ame
to the base pan and side covers.
• Push frame as fat" left as possible, drive the
four screws.
• Check to be sure door clears the trim when
open.
• Mark the four holes on the side of the trim.
•Remove the fl'ame.
• Center punch and drill 3/32" pilot holes.
• Position the assembled fl'ame around the
oven and secure with 8 screws C, using the
smaller Phillips head screwdriver to prevent
burring the Phillips head.
11