Data Sheet

XCR15 Intel 3rd Generation Core i7 Based Rugged
CPCI Single Board Computer
Specifications (continued)
USB Ports
Four USB 2.0 ports routed to rear J4 connector
(one of which is upgradable to USB3.0 in place of
1 SATA port)
One USB 2.0 port routed to front panel
One USB 3.0 port (optional) routed to front panel
(precludes use of XMC / PMC site 2)
CompactPCI Backplane Interface
PICMG 2.0 R3.0 compliant CPCI local bus standard
Serial Ports
Three 16550 compatible full duplex async serial
ports
One routed to front panel RS-232 (COM3)
Two routed to J5, with user selectable RS-
232/422/485
Ports feature independent 16-byte FIFO
supporting baud rates up to 115 Kbaud
PMC/XMC Expansion
Up to two on-board mezzanine expansion sites
- Site 1 PMC (PCI-X up to 64-bit /133 MHz) and
XMC (x8 PCIe Gen 3) capable; XMC and PMC
rear routed to J3
- Site 2 PMC (PCI-X up to 64-bit /133 MHz) and
XMC (x4 PCIe Gen 2) capable; PMC rear IO
routed to J5
PCI signaling is 3.3V, 5V tolerant; +/- 12V
mezzanine only
25W per site capable mezzanine power supply
Audio
High Definition Audio Codec
Stereo line in and stereo line out
Video
One VGA port routed to front panel
One VGA port routed to J4; can be two ports if
front I/O not used
Two DVI ports routed to rear I/O J4/J5
SATA
Four SATA ports to rear I/O
One eSATA port (optional) routed to front panel
(precludes use of XMC / PMC site 2)
GPIO
13 GPIO pins – software configurable
On-board Hard Drive
SATA hard drive or SSD can be optionally ordered
(precludes use of PMC/XMC site 2)
LED (not in conduction-cooled style)
Three status LEDs and four BIT status on front
panel
Two status LEDs on rear
MRAM / Watchdog/ Real-Time Clock/ TPM
512 kB non-volatile RAM (MRAM)
SuperIO watchdog
Real-time clock in Cougar Point PCH
Power Requirements
+5, +3.3V
+12V for mezzanine only
Block Diagram
©2012 GE Intelligent Platforms. All Rights Reserved.
All other brands or names are property of their respective holders.
Specifications are subject to change without notice.
04.12 GFA-xxxx
Environmental
Level 1 Level 2 Level 3 Level 4 Level 5
Cooling Method Convection Convection Convection Conduction Conduction
Conformal Coating Optional Standard Standard Standard Standard
High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C
Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall
Random Vibration 0.002g
2
/Hz* 0.002g
2
/Hz* 0.04g
2
/Hz** 0.1g
2
/Hz** 0.1g
2
/Hz**
Shock 20g*** 20g*** 20g*** 40g*** 40g***
*With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration
Note : Processor performance and temperature are inter-dependent. For a given temperature, a maximum speed is achievable, and
conversely for a given processor speed a maximum temperature is achievable. Consult the product manual for details
About GE Intelligent Platforms
GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology
company and a global provider of hardware, software, services, and expertise in automation and embedded
computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a
sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government
and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in
Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com.
GE Intelligent Platforms Contact Information
Americas: 1 800 433 2682 or 1 434 978 5100
Global regional phone numbers are listed by location on our web site at defense.ge-ip.com/contact
defense.ge-ip.com
Temperature Sensor
Onboard ambient temperature; CPU
Other HW Features
Hardware Write Protection
Front power button LED
IPMI 2.0 Controller (PICMG 2.9)
Transition Module
CTM20
Certification
CE