Technical Specifications

601
Status Tab
 Reset Continuous Diagnostics - Resets the continuous diagnostic data (stroke count,
cycle count, time open, time closed, and time near closed) to 0. When reset, the
previous values are lost, thus the data should be recorded somewhere before being
reset is used.
 Detach Trend – Removes the Trend display from the tabbed dialog and creates a
separate display.
 Help - Displays the help file at the Diagnostics tab instructions.
Status Tab
From the Status tab you can see the internal status of the SVI. The tab is divided into four
separate sections for Operations, Communication, Firmware, and Circuitry.
Figure 19 Status Tab
Fields
Clear Faults Clicking Clear Faults clears the status bits inside the SVI device.
This button is only available when the SVI is in manual or operating
mode.
Change Mode The SVI can be in any of several operating modes: