Technical Specifications

559
Monitor Tab
Monitor Tab
From the Monitor tab, you can see the basic functioning of the SVI including the valve
position, the input signal, actuator pressure, and the mode. This tab allows you to change
the valve position (when in manual mode) by dragging the position indicator.
Figure 1 Monitor Tab
Fields
Tag A user-assigned name for the valve with maximum eight charac-
ters. The value is displayed in many views but can only be changed
from the “Configure Tab” on page 571 or with commands sent
from the Monitor tab.
Descriptor A user-defined field with up to 16 characters. This field is com-
monly used to describe the user of the valve. The value appears in
many views but can only be changed from the “Configure Tab” on
page 571 or with commands sent from the Monitor tab.
Message A user-defined field with up to 32 characters. This field may be
used for any information the user wants. The value is displayed in
many views but can only be changed from the “Configure Tab” on
page 571 or with commands sent from the Monitor tab.