Technical Specifications

ValVue Digital Communications Software Ver. 2.80
52
GE Oil & Gas
2. Right-click on the gray background of the window and select Burst Mode Control and
Figure 32 appears.
Figure 32 Burst Mode Control
3. Select the desired command.
4. Select OK.
Figure 33 Burst Mode Configuration
Connecting the SPA with the SVI II
Connecting the SPA with the SVI II
• Valvue must be set as as
a secondary master if the
SPA is in polling mode to
be able to connect
•PV = Position
• SV = Actuator Pressure
• TV = Not Defined Yet
• QV = Not Defined Yet
The on/off contacts can be triggered from
the status bits sent with every message.
The module must be configured to let it know
which bit will trigger the contact.