Technical Specifications

ValVue Digital Communications Software Ver. 2.80
496
GE Oil & Gas
Buttons and Fields
Adapter Information
Tag Enter up to eight characters long and is used to identify the VECTOR in the system
and appears throughout the program. This can reflect a label from a plant drawing
or a control system.
Long Tag Same as Tag, but you can enter up to 32 characters.
Descriptor Enter up to 16 characters for VECTOR-related information.
Message Enter up to 32 characters as a device-related message.
Assembly Number Enter an overall field device identity number.
Manufacturer Enter the manufacturer.
Model Enter the model.
Device ID Enter the Device ID.
Device Serial Num-
ber
Enter the VECTOR serial number.
Date Enter a date in dd/mm/yyyy format.
MAC Address Enter the VECTOR MAC address.
Univ Cmd Rev Enter the HART Command revision.
Hardware Rev Enter the hardware revision.
Trans Cmd Rev Enter the transmitter revision.
Software Rev Enter the ValVue VECTOR software revision.
Country Use the pulldown to select the country where the VECTOR is installed:
 America
 Japan
 Germany
 France
 Spain
 Russian
 China
SI Unit Control Use the pulldown to select either:
None: The application uses English units.
SI Only: The application uses only SI units.
Electronics Tempera-
ture
Use the pulldown to select the temperature scale:
 degC
 degF
 Kelvin
Write Protected