Technical Specifications

ValVue Digital Communications Software Ver. 2.80
466
GE Oil & Gas
Buttons and Fields
Tag
Enter up to eight characters long and is used to identify the VECTOR in the
system and appears throughout the program. This can reflect a label from a
plant drawing or a control system.
Long Tag
Same as Tag, but you can enter up to 32 characters.
Descriptor
Enter up to 16 characters to describe the user of the valve.
Message
Enter with up to 32 characters for any information.
Configure Power
Mode checkbox
Check this box to enable the Power Mode pulldown list.
Power Mode
Use this pulldown list to select the type of adapter power:
 Loop Powered - Low (1V)
 Loop Powered - Medium (1.5 V)
 Loop Powered - High (2.0 V)
 Loop Powered - Highest (2.5 V)
 Direct Powered - High Power
 Direct Powered - Power Saving
 Direct Powered - External Battery
Join Device to
Network checkbox
Click to validate that the Join Key is correct and to add the device to the net-
work by clicking Apply.
Network ID
Enter a unique ID using digits only from 0 to 36863.
Join Key
Enter four characters in both boxes for each of the eight fields.
Report & Backup
Click and when Setup Wizard completes a report of settings appears using
the selection made in Report Setup.