Technical Specifications

45
Configure Multiplexor Setup and
ValVue Setup
2. Navigate to the required directory to either locate the old device
list file, or to create a new one.
Use Multiplexor Use this option to set ValVue for multiplexor operation. When
checked then the MUX Setup, and MUX Reset controls appear on
the Connected Devices page context (right click) menu.
This checkbox also activates the multiplexor pulldown list, Baud
Rate and Nodes Search. Multiplexor choices include:
 MTL-AMS
 MTL-Cornerstone
 PF-2700F
 PF-2700G
 SoftMux
 PF-WHA-GW
CAUTION Do not check Use Multiplexor unless ValVue is connected to
Multiplexor hardware.
Baud Rate Set a baud rate that is equal to the baud rate set on the multiplexor
hardware. The MTL multiplexor supports baud rates of 9600,
19200, and 38400.
Nodes Search Scan all nodes - Click this radio button and when you click Re-Scan
on the Connected Devices screen ValVue scans all 32 nodes to find
the connected devices.
Selected Nodes - Click this radio button and the Select list appears
for selecting a particular node (s) that are scanned when you click
Re-Scan on the Connected Devices screen.
Configure Multiplexor Setup and Operation
ValVue supports the MTL HART multiplexor to monitor and operate many HART devices from
a single computer.