Technical Specifications

ValVue Digital Communications Software Ver. 2.80
446
GE Oil & Gas
ValVue VECTOR Software
ValVue VECTOR provides the ability to:
 Quickly and easily perform initial set up of the VECTOR on the network. See “Setup
Wizard Screen” on page 465.
 Configure VECTOR operations. See “Configure Power Tab” on page 474.
 Monitor VECTOR operation. See “Status Screen: General” on page 505.
 Diagnose some problems using the ValVue VECTOR’s event configuration, monitoring
capabilities and maintenance. See “Status Screen: General” on page 505 and
“Maintenance Tab” on page 501.
About This Manual
These instructions are intended to help a field engineer install and setup a VECTOR in the most
efficient manner possible. If you experience problems that are not documented, contact GE or
your local GE representative.
Conventions Used in This Manual
Conventions used in this Manual are as follows:
 Italicized letters are used when referencing a term used in the software, for emphasis
on important items and for fields where data appears or for user entered data.
 Actions performed on buttons, checkboxes, etc. appear bolded.
Indicates important facts and conditions.
Indicates a potentially hazardous situation, which if not avoided could
result in property damage or data loss.
Indicates a potentially hazardous situation, which if not avoided could
result in death or serious injury.