Technical Specifications

397
Filter Parameters
Advanced Setup
Filter Parameters
The filter parameters are always available to edit: Filter Time Constant, Deadzone, and
Validate window. Once Smart Filter has been enabled, the smart filter parameters are ready
for use.
Filter Time Constant
To change the Filter Time Constant:
1. Click Smart Filter Enable.
2. Enter a new value in Filter Time Constant.
3. Click Apply.
Figure 209 Changing Filter Time Constant
If you enter a Time Constant less 0.1 sec and greater than 60 sec., an error message
appears (Figure 210):
Figure 210 Filter Time Constant Error Message