Technical Specifications

ValVue Digital Communications Software Ver. 2.80
324
GE Oil & Gas
Level Indicator
This indicator shows the level position graphically. The indicator consists of two parts: 
 The upper part contains an indicator showing the value of the input signal. In Normal
mode this is the position setpoint.
 The center green bar shows the transmitter level where % = level detected. The
numerical valve position is shown in the center.
Status on the 12400 Monitor Screen
The 12400 tracks many errors and fault conditions. Standard HART device status information
is displayed in the Status box (bottom left on the Monitor screen). When there is additional
information on internal fault codes, the Status box contains Additional Status Available. To see
the additional status click the Status tab. The fault codes appear on the Status screen. The
Status screen has multiple tabs and screens arranged according to their function. 
This functions the same on the 12400 Controller Monitor screen, but is labeled Device Status
instead.
Figure 112 12400 Monitor Screen