Technical Specifications

ValVue Digital Communications Software Ver. 2.80
204
GE Oil & Gas
154 Read Setpoint: Reads the manual setpoint of the controller.
141 Read Raw Data: Returns information from the SVi1000 that is useful to Masoneilan
engineers for diagnostic purposes. The information includes values from the position
measurements, and the internal SVi1000 temperature.
143 Read Temperatures: Reads the historical low and high range to which the controller was
exposed and reads the actual circuit board temperature.
249 Read Operating Mode: Reads and displays the controller operating mode.
4. Information Pane
Use the Send Cmd button to make a request for the display of various system data in this
pane. For example, device identifier settings see Figure 9 on page 200.
To retrieve information:
1. Select a command from the
Send Command drop down list.
2. Click Send Cmd.