Technical Specifications

81
Block Tag Info
Configuration Services
D. D. Rev. The revision of the Device Description is read only.
Model The model of the device is read only.
Descriptor Use this field for a device description or for a memo (28 char.
max).
Block Tag Info
Each block is assigned a default tag-name that should be renamed by the user.
RB The tag of the device resource block.
TB The tag of the device transducer block.
AO The tag of the device analog output block.
DI1 The tag of the device discrete input 1 block.
DI2 The tag of the device discrete input 2 block.
PID The tag of the device PID block.
SPLT The tag of the device Output Splitter Block.
CAUTION Do not change the device tagname or the node address of a
device in an operating Foundation Fieldbus segment.
Control linkages are lost. Do not use a leading space in a
device tag name, this causes the device to become
non-operational. Block tags are not used for control
linkages. They can be changed without losing control
linkages. However, some applications require restarting if
another application changes a block tag.
Others Installed
PID Block Checked when the device PID block is activated. Read only.
Pressure Sensor Checked when the device pressure sensor is installed. Read
only.
Link Master Used to control communications on the fieldbus.
Signature Used to measure and maintain characteristic data.