Technical Specifications

ValVueFF Software Interface to FVP
74
GE Energy
2. Perform a Select Calibration Type at Target Position, if required, by:
a. Clicking either:
❑ 0% Calibration
❑ Span Calibration
❑ 50% Calibration
b. Clicking Apply Calib.
3. Perform a Pick Target Position for Calibration, if required, by:
a. Clicking either:
❑ 25
❑ 10
❑ 1
❑ 0.1
❑ 0.01
b. Using the Change To up/down arrows to select a Target Pos.
c. Clicking Apply Calib. and the Result appears.
4. Select Next.