Technical Specifications

© 2014 General Electric Company. All rights reserved.
76 | =GE Oil & Gas
Re-Scan
To build a new device list:
1. Select Re-Scan on the Connected Devices screen. In the:
 Direct-connect configuration of ValVue ESD all polling addresses are checked if the
options allow multidrop.
 Multiplexor configuration, all nodes are checked. If there are a large number of devices
connected to the multiplexor, this function takes time to complete.
The rescan is completes.
2. Save the device list to a file so that rescanning is not necessary every time ValVue ESD is
started. If there is only one device on the loop, select Stop when it has been found to save
scan time.