Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 61
© 2014 General Electric Company. All rights reserved.
Mux Option The Use Multiplexor option allows you to select multiplexor opera-
tion. If the Use Multiplexor control is checked then the MUX Setup,
and MUX reset controls are added to the Connected Devices page
context (right click) menu.
 Check Use Multiplexor and set a baud rate that is equal to
the baud rate set on the multiplexor hardware with DIP
switches.
NOTE Settings in the Options page for ValVue ESD must agree with the
MUX configuration settings that are also shown. The Mux
configuration can have originated in other applications.
NOTE Do not check Use Multiplexor unless ValVue ESD is connected to
Multiplexor hardware.
 The MTL multiplexor supports baud rates of 9600, 19200, and
38400. You must set a baud rate that matches the
configuration of the hardware.
 After the options are selected, select OK to accept the
changes and exit to Connected Devices page or select
Cancel to discard the changes.