Technical Specifications

© 2014 General Electric Company. All rights reserved.
Masoneilan Valves ValVue ESD Instruction Manual =
| 335
Advanced Setup with ESDVue
Overview
This section provides instructions for a custom, or advanced setup of the SVI II ESD with ESDVue.
Methods to Set Up the SVI II ESD
There are two methods of setting up the SVI II ESD with ESDVue:
 Run Setup Wizard from the Configure screen.
 Advanced Setup of the SVI II ESD by an advanced user
The Setup Wizard automatically runs through the specified setup routines and is the
recommended method for initializing an SVI II ESD.
Steps to Set Up SVI II ESD
To set up the SVI II ESD:
1. Configure the SVI II ESD.
2. Read and set configuration parameters
3. Calibrate the SVI II ESD.
4. Run Find Stops.
or
1. Run Manual Find Stops.
2. Run Auto Tune.
3. View calibration parameters.
Before making any configuration or calibration changes ESDVue must be in Setup mode.