Technical Specifications

© 2014 General Electric Company. All rights reserved.
234 | =GE Oil & Gas
2. Run Extended Signature
To do this:
1. Click the Diagnostics tab (Figure 245).
Figure 245 Diagnostics Tab
2. Configure:
 Start (%) to 105%
 End (%) to -5%
 Speed (%/s) to 2
3. Click Perform Ext. Diag.
Once the test completes.
4. Click Load from DB and the dialog appears (Figure 246).
5. Click the Extended Signature radio button.
6. Select a Time Stamp and click OK.