Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 233
© 2014 General Electric Company. All rights reserved.
1. Set PST Start Trigger
To do this:
1. Enter Setup mode.
2. Click the Configure tab and select the PST trigger type (s) (Figure 244).
Figure 244 Allow PST Trigger
These fields configure for the following:
 Allow PST by HART - use for ValVue ESD, HH375, DTM and HART Host with DD
 Allow PST by Button - use for LCD pushbutton control
 Allow PST by Al - use for ASD A/DSD
3. Click Apply Changes.