Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 21
© 2014 General Electric Company. All rights reserved.
ValVue ESD Overview
Masoneilan's ValVue ESD software is a Human-Machine Interface (HMI) software tool that
provides a powerful interface to Masoneilan’s SVI II ESD, the Model 12300 and 12400 Digital
Level Transmitter (DLT), and other HART instruments used in a Safety Instrumented System
(SIS).
ValVue ESD is used to configure, calibrate and perform partial stroke testing and valve
diagnostics with the SVI II ESD utilizing HART communications protocol.
Using ValVue ESD you can:
 Monitor SVI II ESD Operation
 Quickly Set Up the SVI II ESD
 Advanced SVI II ESD Set Up
 Calibrate the SVI II ESD
 Configure or Run Partial Stroke Test (PST)
 Check the SVI II ESD Status
 Perform Diagnostics on SVI II ESD
System Requirements
Listed below are the hardware and software requirements for the computer used with ValVue
ESD:
Hardware
Processor: PC with minimum 1 GHz Intel Pentium or compatible
RAM: Minimum 1gigabyte
Disk: Depends on product
* Assuming 100 devices, 1 PST/month for 5 years
Table 1 ValVue Software Installation Sizes
Product Application
Component
Database Component Total Installation Size
ValVue ESD 15M 30M minimum* 45Meg
PRM Central ValVue ESD 15M 30M minimum* 45Meg
PRM PLUG-IN ValVue ESD 15M N/A 15Meg