Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 187
© 2014 General Electric Company. All rights reserved.
Figure 178 Time/Sample Rate Error Message
3. Enter the Step Size.
The Step Size (total distance of each step) must be less than the difference between the
Start and End positions and also greater than 0.
If you enter an incorrect Step Size an error message appears (Figure 179).
Figure 179 Step Size Error Message
4. Select the test direction: One Way or Two Way. One way runs the step test ramping up,
only. Two Way runs the step test ramping up and ramping down.