Technical Specifications

© 2014 General Electric Company. All rights reserved.
176 | =GE Oil & Gas
 Full Open - Moves the valve to full open. This command works by taking the valve out of
closed loop control and sends a high or low signal to the I/P.
 Full Closed - Moves the valve to full closed. This command works by taking the valve out
of closed loop control and sends a high or low signal to the I/P.
 Set Valve Position - Allows you to set the valve to a specific position (this is
accomplished by momentarily returning to manual mode, repositioning the valve, and
returning to setup mode).
 Reset to Factory Cal - Resets the signal and pressure calibration to their factory
settings.
 Detach Trend - Removes the trend display from the tabbed dialog and creates a
separate trend display.
 Help - Displays the help file at the Calibrate screen instructions.