Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 135
© 2014 General Electric Company. All rights reserved.
Step 1 - Setting the Tag and Descriptor
If you are changing Tag and Descriptor information, make the changes prior to executing
(Apply) the remaining Setup Wizard steps. If you are using the Setup Wizard for calibrating
travel and auto tuning, ESDVue runs through the calibrate and auto tune procedures and
does not return to the Setup Wizard window.
1. Select Set Tag and Descriptor (Figure 113).
2. Click in and edit the Tag field.
Figure 113 Setup Wizard - Setting Tag and Descriptor