Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 129
© 2014 General Electric Company. All rights reserved.
Pressure Units
You can select the units in which the actuator pressure is reported: psi, bar, or kpa.
Air Action
Use this option to set the action of air on the valve; Air To Open causes air to open the valve
and Air To Close causes air to close the valve.
Configure I/O
Use this to define characteristics of the inputs and output switches and position retransmit.
Accessing Configure I/O
Click Configure I/O on the Configure screen and ESDVue launches the I/O Configure window
(Figure 108). You can change the following configuration parameters:
 Output Switches
 Position Retransmit
To configure the inputs and outputs:
1. Click Configure I/O on the Configure screen and the I/O Configure window appears
(Figure 108).
2. Change the following configuration parameters:
 Output Switches - See “Output Switches (DO2)” on page 130 for descriptions of all the
I/O settings.
 Position Retransmit - See “Position Transmitter (AO)” on page 132 for descriptions of all
the I/O settings.
Figure 108 Launching Configure I/O
3. Click OK.