Technical Specifications

© 2014 General Electric Company. All rights reserved.
128 | =GE Oil & Gas
PST Allow Options
The PST Allow options provide the following configuration options:
 Allow PST by HART - When enabled, PST is executed by HART command from a HART
device.
 Allow PST by Button - When enabled, PST is executed by the display button.
 Allow PST by AI - When enabled, PST is executed by Analog Input.
 Latch Trips Enabled - When disabled, the SVI II ESD takes no action when the SVI II ESD
is tripped. You can enable this checkbox to enable latch trips. Further, enabling this
checkbox activates the Air Loss Trip checkbox below.
 Air Loss Trip - When enabled, you can enter a value into the Trip Level field. Once the
air pressure goes below that level, the trip occurs. Units used are set using the
Pressure Units pulldown.
Language
The SVI II ESD can display its menu in:
 English
 French
 Spanish
 Portuguese
 Japanese
 Italian
 German
This list box allows you to choose which to use. The ESDVue program is not affected.