Technical Specifications

© 2014 General Electric Company. All rights reserved.
Masoneilan Valves ValVue ESD Instruction Manual =
| 123
Configure
What You Can Do on the Configure Screen
In the Setup mode, from the Configure screen (Figure 100 on page 124), you can set the
information that tells the SVI II ESD how the valve/actuator is configured by adjusting the
following parameters:
 Tag Information
 Button Lock
 Fault Settings
 PST Allow Options
 Language
 Pressure Units
 Air Action
On the Configure screen you can also set up the Inputs and Outputs with Configure I/O (refer to
“Configure I/O” on page 129) and quickly commission the SVI II ESD by launching Setup Wizard
(refer to “Setup Wizard” on page 133).
Before making any configuration changes on the Configuration screen
ESDVue must be in Setup mode. If you need to change modes refer to
“Change Mode” on page 83.
NOTE