Technical Specifications

Masoneilan Valves ValVue ESD Instruction Manual =| 105

$$CustomCharact Displays the Custom Characterization constants

Individual items of the characterization curve may be selected by enter-

ing:

$$CustomCharact[n] - where n is a number between 0 and 17

$$ButtonLock Button Lock Level

$$Bumpless Bumpless Transfer On/Off

$$BumplessSpeed Time to move from Manual to Normal (operating) mode

$$TightShutoff Tight Shutoff On/Off

$$TSValue Tight Shutoff Value

$$ULimitStop Upper Position Limit On/Off

$$ULSValue Upper Position Limit

$$LLimitStop Lower Position Limit On/Off

$$LLSValue Lower Position Limit

$$NearClosed Value below which is considered Near Closed

$$PosUnits Position Units of Measure (always %)

$$PresUnits Pressure Units (psi, bar, or kpa)

$$SignalUnits Signal Units (always mA)

$$Language SVI II ESD Display Language

$$LowSignal Low Calibration Value

$$HighSignal High Calibration Value

$$P Proportional Gain In PST controller

$$Padjust Adjustment to P when valve is exhausting

$$I Integral action of PST controller

$$Beta Step size adjustment in PST controller

$$D Derivative action of PST controller

$$PosComp Position range compensation of PST controller

$$DeadZone Dead zone of PST controller

$$Damping Damping coefficient of PST controller

$$Travel Total strokes of the valve

$$Cycles Total cycles of the valve

Table 5 Report Setup Parameters (Continued)

Report Parameter Information Provided in Report