Installation Guide

2 31-2000740 Rev. 0
Installation Instructions
1
LAY THE DOWNDRAFT
Lay the downdraft vent system on a soft surface with
blower facing down.
2
MOVE THE VENT OUT
Gently move the vent out until the screws on the
sides are visible.
3
REMOVE THE TRIMS
Remove the trim by loosening the four screws ( 2
each side).
5
INSTALL HOOD
Return to and proceed with the Installation Instructions
to install the vent system.
4
ATTACH THE NEW TRIM
Attach the new trim by tightening the four screws (2
each side).
Printed in China
Trim
Screws
Trim
Screws