Owner Manual

10 49-2000708 Rev. 2
Installation Preparation
INSTALLATION PREPARATION
PRODUCT DIMENSIONS
30” Models
Requires a 30” opening.
36” Models
Requires a 36” opening.
TOOLS AND MATERIALS
REQUIRED (NOT SUPPLIED)
Wire cutter/stripper
Level
Aluminized
duct tape
Safety glasses
Phillips screwdriver with
at least 6" shank
Strain relief for
junction box
Strain Relief I
Electric drill with #2 Phillips
and 1/8" and 5/16" drill bits
UL listed wire nuts
8" round duct
Wire Nuts
Pencil and tape measure
Gloves
REMOVE THE PACKAGING
CAUTION
Wear gloves to protect against
sharp edges.
■ Remove the hardware bag, literature package and
other boxed parts.
■ Remove and properly discard the protective
plastic wrapping and other packaging materials.
10"
21"
30"
16-1/2"
10"
21"
36"
16-1/2"