Installation guide

0
Profi/e/ r nce Seri
SCB2OOOCBB- AdvantiumTM Wall Oven
Single SpeedcookInstallation SpeedcookOvenInstallationabovea
GEWarmingDrawer
ConstructSolid
BottomMin.3/8"
Plywood
Supportedby
2x4or1 x2
Runners,all
FourSides
SpeedcookOvenInstallationabovea single
GEBuilt-In Wall Oven
ConstructSolid
BottomMin.3/8"
Plywood
, Supportedby
2x4orlx2
Runners,all
FourSides
ConstructSolid
BottomMin.3/8"
2x4orlx2
Runners,all
FourSides
363/4"Mir
Required
Order a 30"wide single oven cabinet or cut the opening
in a wall to dimensions shown.
The rough opening must be:
• Depth - 19"Min.
• Width - 28-1/2"Min.
• Height - 21"Min.
• 36-3/4"from the floor to the cutout is required.
• These ovens require 3/4" overlap on each side,top and
bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides of
the opening.
SpecificationRevised10/00
or2x2
Runnersor
SolidBottom,
MustSupport
100Ibs.
Note: Additional clearance between the
cutouts may be required. Check to be sure
the oven supports above the Warming
Drawer location does not obstruct the
required interior 23-1/2" depth and 9-1/4"
height. See installation instructions for
details.
PerOven
Requirement
Foranswersto yourMonogram?
GEProfilePerformanceSeriesl"
GEProfileTM or GEappliancequestions,call
GEAnswerCenter_service,800.626.2000.
(_ Listed by
Underwdters
Laboratories