Manual

Reversingthe Door. ge.cem
Topcover
Back of wine chiller
Unplug the wine chiller,
@ Remove the two screws at the back of the top cover,
I,ift the back of the cover up about 2" (5 cm) and then slide it
fin'ward slightly, but do not remove,
Top
i)
Disconnectpower
connectors
O Tilt the co_er on its side. I,ocate the connectors at the
top power
fI'ont of the co_,ei'. Disconnect each connector bv, [)ressing, in on
the locking, tab on the side of the connector, then I)ullin°_ out.
Set coxer aside.
Front of wine chiller
Removescrewsand
movetootherside
Removeplug buttonand ,--.,,__lbT_-
moveto other side /,_
///=
/
Remove scre/wsand Top of wine chiller
top hinge,and move
to other side
0
O
Q
O
O
(:areflfllv la_ the wine chiller on its back.
Remove the screws on the top hinge (_ight side). Remove the hinge.
On the opposite side, remove the screws attaching the top plate to
the cabinet, and install them in the holes leit vacant bv the top
hinge screws.
Remove the small plug button ,fi'om the top leit side of the door and
install it in the hole on the right side.
Insert the hinge pin ti'om the top hinge into the hole on the top leti
side of the door. Attach the top hinge to the cabinet with the screws.
Make sure the door is aligned with the wine chiller cabinet befln'e
tightening the screws.