Manual

Reversingthe Door.
Removelevelingleg
and spacerand move
to other side
Removeright door
stopandscrews.
Installleft doorstop
(packedseparately/
and screws on
otherside
O I_emove the botton_ hinoe by removino the screws and leveling le ,
O Remo_e the right door stop and install the left door stop
(_._R 13X 10274), packed separatel_ on the opposite side.
O Remove the leveling leg and spacer on the opposite side and install
it on the right side.
IMPORTANT'.Theleft leg has a spacer that must be moved to the right side
leveling leg when the door swing is reversed.
O Install the bottom hinge with the screws and levelino
leg,
on the left side.
Bottom of
wine chiller
\
Removeleveling
leg, screws,bottom
hingeandwasher,and
moveto other side
0
0
0
0
G
Stand the wine chiller upright.
Open and close the door, checking the alignment of the door to the
cabinet. If necessa_T; loosen the screws attaching the top hinge to
the cabinet, realign the door and retighten the screws.
Place the top cover on the cabinet and reconnect the power
connections,
Slide the top cover back in place and replace the two screws.
Plug in the wine chiller. Reset the controls to the desired settin ,
10