Installation guide

Installation instructions

r4-]CONNECT POWER

Plug power cord into properlg grounded receptacle.

rs] INSTALL FILTERS, CHECK OPERATION

• Press the ON/OFF pad on the control

to raise the vent.

• Slip fingers into the vent holes. Lift the vent

straight up and pull forward.

Retainers

Filter Tabs

• Slide filter into the retainers Grid close the vent.

o Press the Fan Speed HIGHER pad to start the

blower. Adjust the blower bg pressing HIGHER or

LOWER.

, To lower the vent, press the ON/OFF pad.

NOTE: It is not necessorg to turn the fan OFF

before lowering the vent. The fan will automaticallg

turn off when the vent is lowered. When the fan

is not turned off before lowering the vent, it will

automaticallg come on at the previouslg set speed

when the vent is fullg raised.

IMPORTANT: The vent can be activated bg pressing

the pads on the switch. Do not use excessive force

or sharp objects to activate the switch. Damage

could occur and void the warrantg.