Installation guide

Installation
[] SLIDE THE OVEN INTO THE CUTOUT
CAUTION: Two people are required
to lift the oven into the opening. Grasp the bottom
at the front and rear. DO NOT USE THE HANDLE
TO LIFT THE OVEN. DAMAGE WILL OCCUR!
PRECAUCI6N: Serequieren
dos personas para levantar el homo e introducirlo
en la abertura. Agarre la parte inferior par delante
y par detr6s. NO USE LA IANIJA PARA LEVANTAR
EL HORNO. iPUEDE DA--ARSE!
• Lift and hold the oven at the front of the opening.
Hold the oven at a 45° angle and plug in the
power cord.
• Carefully, slide the oven into the cabinet part
way. Leave the oven a few inches forward of the
cabinet frame.
• Check to be sure the power cord is not trapped
under the oven or along the sides of the oven.
[_] INSTALL BOTTOM TRIM
• Align bottom trim tabs to slots in the bottom
of the oven.
_L
_ / ¸
T _ T T
i
I I
Secure the bottom trim to the bottom of the oven
using 3 brass screws provided.
INSTALL MOUNTING SCREWS
" DID [] [][] ]
[][][][] [][] 0 _ O _ [][]
;:":_t)j
r M }_3
• Drill pilot holes through the side flanges, 2 on each
side.
Drive the color-matched screws into the side
flange.
141FINALIZE INSTALLATION
• Turn the power on at the source. The interior light
should come on when the door is opened.
Refer to the Owner's Manual for operating
instructions.
8 Printed in Korea