Use and Care Manual

12 49-2000866 Rev. 0
* Compatible Apple or Android devices and home WiFi network required.
Cooking Options
The options pad opens up a menu of more cooking modes when the oven is off. It opens a menu with additional
features if a cooking mode is already in process. You can exit the menu at any time by pressing the Options pad
again.
You must first select an oven and a mode (bake, convection bake, convection roast) and then select Options
to get to the following functions.
Cook Time
Counts down cooking time and turns off the oven when
the cooking time is complete. Select a desired cooking
mode.Usethenumberpadstoprogramabaking
temperature. Press the Cooking Options pad and
select Cook Time.Usethenumberpadtoprogram
cook time in hours and minutes. Then press Start/Enter.
This can only be used with Bake, Convection Bake, and
Convection Roast.
Delay Time
Delayswhentheovenwillturnon.Usethistoseta
time when you want the oven to start. Press the desired
cookingmodepad.Usethenumberpadtoprograma
baking temperature. Press the Cooking Options pad
and select Delay Time.Usethenumberpadstoprogram
the time of day for the oven to turn on, and then press
Start/Enter. Delay Time is not available with all modes.
NOTE: When using the Delay Time feature, foods that
spoil easily – such as milk, eggs, fish, stuffing, poultry,
and port – should not be allowed to sit for more than
1 hour before or after cooking. Room temperature
promotes the growth of harmful bacteria. Be sure that the
oven light is off because heat from the bulb will speed
harmful bacteria growth.
Oven Probe (Lower oven only)
NOTE: Only accessible through traditional and
convection cooking modes.
Monitors internal food temperature and turns the oven
off when the food reaches the programmed temperature.
Insert the probe, press the desired cooking mode, and
program the probe temperature. See the Cooking Modes
Section for more information. The probe can only be used
with Bake, Convection Bake, and Convection Roast.
Settings
The Cooking Options and Settings pads open up more detailed menus in the display that allow access to
additional functions. For each you select the function in the display using the associated number pad. You
can exit at any time by pressing the Cooking Options or Settings pad again.
WiFi Connect/Remote Enable
Your oven is designed to provide you with two-way
communication between your appliance and smart
device. By using the WiFi Connect features, you will
be able to control essential oven operations such as
temperature settings, timers and cooking modes (such
as Air Fry) using your smartphone or tablet.*
Select Settings then Wifi - follow the instructions on your
oven display and phone app. It is necessary to turn on
WiFi before using Remote Enable on your oven.
Connecting your WiFi Connect Enabled Oven
What you will need
Your GE Appliances oven uses your existing home WiFi
network to communicate between the appliance and
your smart device. In order to setup your GE Appliances
oven, you will need to gather some information:
1. Each GE Appliances oven has a connected appliance
information label that includes an Appliance Network
Name and Password. These are the two important
details that you will need to connect to the appliance.
The label is typically located inside the door of the
oven or drawer. On some models it will also be
accessible through the settings menu on the control
screen.
2.
Have your smart phone or tablet ready with the ability
to access the internet and download apps.
3. You will need to know the password of your home
WiFi router. Have this password ready while you are
setting up your GE Appliances oven.
Connect your GE Appliances oven
1. On your smart phone or tablet visit
GEAppliances.com/connect to learn more about
connected appliance features and to download the
appropriate app.
2. Follow the app onscreen instructions to connect your
GE Appliances oven.
3. Once the process is complete, the connection light
located on your GE Appliances oven display will stay
on solid and the app will confirm you are connected.
FCC: ZKJ-WCATA001
Network: GE_XXXXXX_XXXX
Password: XXXXXXXX
PT. NO. 229C6272G001-0
IC: 10229A-WCATA001
MAC ID: XX - XX - XX - XX - XX - XX
Connected Appliance Information
Sample Label
USING THE RANGE:Options/Settings