Use and Care Manual

49-2000991 Rev. 2 13
USING THE RANGE: Settings
Settings
Wifi Connect (cont.)
4. If the connection light does not turn on or is blinking,
follow the instructions on the app to reconnect. If
issues continue, please call the Connected Call
Center 1.800.220.6899 and ask for assistance
regarding oven wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote
enable device installed on this oven that are not
expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely once connected
to WiFi, press Setting’s pad and select WiFi from the
menuontheVFDscreen.Select“TurnRemoteOn”
fromthemenuontheVFDscreenandRemoteSetting
is enabled. The icon will turn on. The oven can now
be remotely started with a connected device. The
icon must be lit to start the oven remotely. The icon
is not required to change the oven temperature while it
is running, set a timer or to turn the oven off from the
phone app while the icon shows it is Wifi Connected.
Remember to verify that the icon is lit if you wish to
start the oven remotely in the future.
NOTE: Foodsthatspoileasily—suchasmilk,eggs,fish,
stuffings,poultryandpork—shouldnotbeallowedto
sit for more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful bacteria. Be
sure that the oven light is off because heat from the bulb
will speed harmful bacteria growth.
Clock
This setting sets the oven clock time. Press the Settings
pad and select Set Clock. Follow the instructions to set
the clock. This feature also specifies how the time of
day will be displayed. You can select a standard 12-hour
clock (12H), 24-hour military time display (24H), or no
clock displayed (Off). Press the Settings pad, select Set
Clock and select either 12/24 hr or On/Off.
Bluetooth
®
- Chef Connect
This is a pairing feature for use with other compatible
Chef Connect enabled products like an over-the-range
microwave oven or range hood. To pair those products to
the range Press the Settings pad and select Bluetooth
®
.
Select Pair and follow the corresponding instructions
included with the mating Chef Connect enabled product.
The range will cancel pairing mode after two minutes if
no mating device is detected. Select Remove to confirm
product is paired or to un-pair from range.
Auto Conv (Auto Conversion)
When using Convection Bake cooking, Auto Recipe
Conversion will automatically convert the regular baking
temperatures entered to convection bake cooking
temperatures when turned on. Note that this option
does not convert convection bake cooking times, it only
converts temperatures. This feature may be turned On or
Off. Select Settings and Auto Conversion, then follow
the prompts to turn this feature on or off.
Auto Off
This feature shuts the oven down after 12 hours of
continuous operation. It may be enabled or disabled.
Select Settings, More, and Auto Off to turn this feature
on or off.
Sound
You can adjust the volume and type of alert your
appliance uses. Select Settings, More, and Sound.
Follow prompts for making volume adjustments or for
changing between continuous and single alert tones. A
continuous setting will continue to sound a tone until a
button on the control is pressed. The oven tone volume
can be adjusted between several settings and off. The
control will sound the oven tone at the new volume level
each time the sound level is changed.
F/C (Fahrenheit or Celsius)
The oven control is set to use Fahrenheit temperatures
(F), but you can change it to use Celsius temperatures
(C). Select Settings, More, and F/C to alter between
temperature scales displayed.
Adjust the Oven temperature
This feature allows the oven cooking modes to be
adjustedupto35ºFhotterordownto35ºFcooler.Use
this feature if you believe your oven temperature is too
hot or too cold and wish to change it. This adjustment
affects Bake and Convection Bake modes. No other
cooking modes are affected. Select Settings and Oven
Adjust to add More Heat or Less Heat and then press
Save (for double ovens use the Upper Oven or Lower
Oven menu selection corresponding to the oven to be
adjusted).
Oven Info
To display the model number and software version on
your unit, select Settings, More, and Oven Info.