Use and Care Manual
Do not use a steel wool pad; it will scratch the 
surface.
To clean the stainless steel surface, use warm, 
sudsy water or a stainless steel cleaner or 
polish. Always wipe the surface in the direction 
of the grain. Follow the cleaner instructions for 
cleaning the stainless steel surface.
To inquire about purchasing stainless steel 
appliance cleaner or polish, or to find the 
location of a dealer nearest you, please call our 
toll-free number:
National Parts Center  1.800.626.2002
GEAppliances.com
Stainless Steel Surfaces (on some models)
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
 If your range is removed for cleaning, servicing or any reason, be 
sure the anti-tip device is reengaged properly when the range is 
replaced. Failure to take this precaution could result in tipping of 
the range and can result in death or serious burns to children or 
adults.
Control Panel
It’s a good idea to wipe the control panel after each 
use of the oven. Use a damp cloth to clean or rinse. 
For cleaning, use mild soap and water or a 50/50 
solution of vinegar and water. For rinsing, use clean 
water. Polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleaners, 
plastic scouring pads or oven cleaners on the control 
SDQHO³WKH\ZLOOGDPDJHWKHILQLVK
Painted Surfaces
Painted surfaces include the sides of the range and 
the door, top of control panel and the drawer front. 
Clean these with soap and water or a vinegar and 
water solution.
Do not use commercial oven cleaners, cleaning 
powders, steel wool or harsh abrasives on any 
painted surface.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping 
film with your fingers and slowly peel it from the 
appliance surface. Do not use any sharp items to 
remove the film. Remove all of the film before using 
the appliance for the first time.
To ensure no damage is done to the finish of the 
product, the safest way to remove the adhesive from 
packaging tape on new appliances is an application 
of a household liquid dish washing detergent. Apply 
with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. 
It cannot be removed if it is baked on.
Control Knobs
The control knobs may be removed for easier 
cleaning.
Make sure the knobs are in the OFF positions and 
pull them straight off the stems for cleaning. 
The knobs can be cleaned in a dishwasher or they 
may also be washed with soap and water. Make 
sure the inside of the knobs are dry before replacing.
Replace the knobs, in the OFF  position to ensure 
proper placement.
Porcelain Enamel Cooktop (on some models)
The porcelain enamel finish is sturdy but 
breakable if misused. This finish is acid-
resistant. However, any acidic foods spilled 
(such as fruit juices, tomato or vinegar) should 
not be permitted to remain on the finish.
If acids spill on the cooktop while it is hot, use 
a dry paper towel or cloth to wipe it up right 
away. When the surface has cooled, wash with 
soap and water. Rinse well.
For other spills such as fat spattering, wash 
with soap and water or cleansing powders 
after the surface has cooled. Rinse well. Polish 
with a dry cloth.
Care and cleaning of the range.  GEAppliances.com
WARNING
21










