Use and Care Manual

20
After a Self-Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a
soap-filled steel wool pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
 You cannot set the oven for cooking until
the oven is cool enough for the door to be
unlatched.
 While the oven is self-cleaning, you
can press the Clock pad to display the time
of day. To return to the clean countdown,
press the Self Clean pad.
 Apply a small amount of vegetable oil
to a paper towel and wipe the edges of the
oven racks with the paper towel. Do not
spray with Pam
®
or other lubricant sprays.
To Stop a Self-Clean Cycle
Turn knob to off position and wait for self clean
light to go off.
Wait until the oven has cooled below the
locking temperature to unlatch the door. You
will not be able to open the door right away
unless the oven has cooled below the locking
temperature.
Using the self-cleaning oven. (on some models)