User manual

Wireless Monitor

The generator is supplied with a battery-powered, wireless

monitor.

The monitor communicates wirelessly with the generator

control panel. The monitor may be placed in a suitable

location in the home. The system has a line-of-sight range of

about 200 feet, but this distance will decrease if the signal

has to pass through walls or other objects.

The wireless monitor communicates with the generator,

every 10 minutes and will display the status via a green or

red LED light on the front of the monitor.

DEALER NAME

DEALER

PHONE

generator power

service needed

generator ready

system update

1 low battery voltage

2 low uid level

3 under/over voltage

4 engine does not start

part #: 316196 fcc id: MCQ-XBS2C IC id: 1846A-XBS2C

5 low frequency

6 engine overspeed

7 high temperature

8 transfer switch

# of flashes service needed

Compare the illustration below with your monitor to

familiarize yourself with these important components.

 • GeneratorReady(A)-GreenLED

 • GeneratorPower(B)-GreenLED

 • ServiceNeeded(C)-RedLED

 • SystemUpdate(D)-Pressforcurrentsystemupdate

with generator.

 • Sevicecodedescriptions(E)-Nameandnumber

of flashes are listed on the backside of the wireless

monitor.

 • BatteryAccessCover(F)-Recordthedealername

and phone number on the label provided. Once

removed, two non-rechargeable AA batteries are

installed in the compartment (G)..

NOT

for

REPRODUCTION