Product Brochure
Table Of Contents
- Slide 1
- Slide 2
- Slide 3
- Slide 4: RISER GFR0728PTDS 7" RightHeight™ Riser / Carbon Graphite
- Slide 5: RISER (continued)
- Slide 6: WASHER HOSES - 90° WX14X10011 6’ STAINLESS STEEL HOSES 90° ELBOWS; 2-pack
- Slide 7: WASHER HOSES PM14X10002 4’ RUBBER WASHER HOSES (2 PACK)
- Slide 8
- Slide 9: SmartHQ APP geappliances.com/connect UNLOCK FEATURES, UPDATES & NOTIFICATIONS
- Slide 10: UNICOUPLER WH41X36697 UNICOUPLE WASHER HOSE ASM
- Slide 11
- Slide 12: DRAIN HOSE EXTENSION WH49X316 DRAIN HOSE EXTENSION KIT FOR COMBO
- Slide 13: FLOOR PAN PM7X2 LOW PROFILE FLOOR PAN WITH DRAIN / WHITE
- Slide 14: 1’ HOSE SPLITTER 2 WAY WX14X10014 SHORT HOSE with Y-ADAPTER (2 NEEDED)
- Slide 15: 240V PLUG CONVERTER GFAPC120V 4-PRONG 240V TO 110V PLUG ADAPTER
- Slide 16
WASHER HOSES PM14X10002
4’ RUBBER WASHER HOSES (2 PACK)
FILTER FOAM PAD WH01X35719
SPONGE PAD FOR COMBO FOAM FILTER
1. Remove the dual-stage lint filter from the Combo.
2. Open the filter frame and remove the old foam
filter pad and discard.
3. Insert the new foam pad into the filter frame,
ensuring proper alignment using the locating tabs.
4. Snap the frame back into place and return the
dual stage lint filter back to the Combo.
1. Insert the rubber washers (if not already
installed) into the ends of the hoses.
2. Attach one end of each of the hoses to the
faucets – one to the HOT and the other to the
COLD.
3. Attach the other end of the hoses to the HOT
valve and the other to the COLD valve making
sure that the lines are properly matched.
4. Tighten, but do not overtighten, the hose fittings
using a pair of pliers.
5. Turn on the faucets and check for leaks.
GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com | 5