Product Brochure
Table Of Contents
- Slide 1
- Slide 2
- Slide 3
- Slide 4: RISER GFR0728PTDS 7" RightHeight™ Riser / Carbon Graphite
- Slide 5: RISER (continued)
- Slide 6: WASHER HOSES - 90° WX14X10011 6’ STAINLESS STEEL HOSES 90° ELBOWS; 2-pack
- Slide 7: WASHER HOSES PM14X10002 4’ RUBBER WASHER HOSES (2 PACK)
- Slide 8
- Slide 9: SmartHQ APP geappliances.com/connect UNLOCK FEATURES, UPDATES & NOTIFICATIONS
- Slide 10: UNICOUPLER WH41X36697 UNICOUPLE WASHER HOSE ASM
- Slide 11
- Slide 12: DRAIN HOSE EXTENSION WH49X316 DRAIN HOSE EXTENSION KIT FOR COMBO
- Slide 13: FLOOR PAN PM7X2 LOW PROFILE FLOOR PAN WITH DRAIN / WHITE
- Slide 14: 1’ HOSE SPLITTER 2 WAY WX14X10014 SHORT HOSE with Y-ADAPTER (2 NEEDED)
- Slide 15: 240V PLUG CONVERTER GFAPC120V 4-PRONG 240V TO 110V PLUG ADAPTER
- Slide 16
RISER (continued)
4. JOIN REAR BRACKETS
▪ Lift riser and hook front brackets of the
riser to front brackets of the Combo.
▪ Align front and rear brackets on Combo
with front and rear brackets on the riser
and loosely fasten the screws. Make sure
the bracket from the Combo is to the
INSIDE of the riser bracket and not the
outside.
5. LEVEL THE COMBO
▪ Locate the 4 legs from the parts package
and install TO MINIMUM HEIGHT.
▪ Stand the Combo upright.
▪ Securely tighten all screws in all brackets.
▪ Make sure the Combo is level by placing a
spirit level on top. Check side to side and
front to back.
▪ Use a 9/16” open
ended wrench to
adjust the legs in
and out. Tighten
the lock nut
against the bottom
of the riser.
NOTE: To minimize vibration the locking
nuts must be tight.
6. ADJUST COMBO LEGS
▪ Snug the feet of the Combo to the top of
the riser to minimize vibration.
7. REMOVE SHIPPING BOLTS & BRACE
▪ Remove the 4 shipping bolts on the back
side of the Combo and the top brace.
8. FINALIZE THE INSTALLATION
▪ Refer to the Combo installation
instructions to complete the installation.
GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com | 3