GE Profile™ UltraFast Combo Accessories Guide & Installation Instructions Pub. No.
THANK YOU FOR MAKING GE PROFILE A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Profile product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them.
TABLE OF CONTENTS STANDARD ITEMS o o o o o o o o RISER IN CARBON GRAPHITE - GFR0728PTDS 2 6’ STEEL WASHER HOSES 90° ELBOWS; 2-pack - WX14X10011 4 HOSE FILTER SCREEN (1) - WH1X2267 4 4’ RUBBER HOSES - PM14X10002 5 FILTER FOAM PAD - WH01X35719 5 4" DUCT VENT CAP - WX08X10070 6 APPLIANCE BRUSH SET - PM14X10056 6 SMART HQ APP - geappliances.
RISER GFR0728PTDS 7" RightHeight™ Riser / Carbon Graphite RISER BRACKETS COMBO BRACKETS x 22 3. INSTALL COMBO BRACKETS TOOLS YOU WILL NEED o Safety Glasses o ¼” Socket & Nut Driver o Gloves o 9/16” open-end wrench o Level ▪ Lay the Combo on its back on a protective surface. Ensure leveling legs are threaded to the minimum height. ▪ Install front brackets on the bottom of the Combo as shown. Use the 2 holes closest to the front and the 2 outermost holes on the bracket.
RISER (continued) 4. JOIN REAR BRACKETS 5. LEVEL THE COMBO ▪ Lift riser and hook front brackets of the riser to front brackets of the Combo. ▪ Locate the 4 legs from the parts package and install TO MINIMUM HEIGHT. ▪ Align front and rear brackets on Combo with front and rear brackets on the riser and loosely fasten the screws. Make sure the bracket from the Combo is to the INSIDE of the riser bracket and not the outside. ▪ Stand the Combo upright. ▪ Securely tighten all screws in all brackets.
WASHER HOSES - 90° WX14X10011 6’ STAINLESS STEEL HOSES 90° ELBOWS; 2-pack 1. Insert the rubber washers (if not already installed) into the ends of the hoses. 2. Attach the 90 degree elbow end of each of the hoses to the faucets – one to the HOT and the other to the COLD. 3. Attach the other (straight) end of the hoses to the HOT valve and the other to the COLD valve making sure that the lines are properly matched. 4. Tighten, but do not overtighten, the hose fittings using a pair of pliers. 5.
WASHER HOSES 4’ RUBBER WASHER HOSES (2 PACK) PM14X10002 1. Insert the rubber washers (if not already installed) into the ends of the hoses. 2. Attach one end of each of the hoses to the faucets – one to the HOT and the other to the COLD. 3. Attach the other end of the hoses to the HOT valve and the other to the COLD valve making sure that the lines are properly matched. 4. Tighten, but do not overtighten, the hose fittings using a pair of pliers. 5. Turn on the faucets and check for leaks.
DUCT VENT CAP WX08X10070 4" DUCT VENT CAP • Durable bump & heat resistant PVC construction • Used to terminate a round 4” duct previously used by a vented dryer. • Readily fits a 4” duct pipe and can be fastened with a flat head screwdriver with the included hose clamp. 1. Clean any debris that is in the duct line and discard the old ducting from your previous dryer, if applicable. 2. Install the PVC cap onto the open duct protruding from the wall. 3.
SmartHQ APP geappliances.com/connect UNLOCK FEATURES, UPDATES & NOTIFICATIONS Download the SmartHQ App To get started, download the free SmartHQ™ App for your Apple or Android phone. SmartHQ is your key to connection. Use the app to connect, control and manage your GE Profile UltraFast Combo. 1. Download the app and sign in or create a new account. (Note: When you create an account, fill in the required information and register. You’ll get an email asking you to verify your account.
UNICOUPLER WH41X36697 UNICOUPLE WASHER HOSE ASM 1. ASSEMBLE THE UNICOUPLER TOOLS YOU WILL NEED o Safety Glasses o Gloves o Pliers o Phillips-Head Screwdriver o Level ▪ Loosen & insert a clamp over the end of the blue drain hose from the Combo and press the hose with clamp onto the Unicoupler’s drain connector. ▪ Turn the clamp key clockwise and tighten the hose to secure it to the UniCoupler. The Unicoupler must be assembled before it is connected to the Combo.
UNICOUPLER (continued) 7. SLOWLY TURN ON THE WATER AT THE FAUCET ALL THE WAY TO THE DESIRED WASH TEMPERATURE 4. CONNECT TO COLD VALVE INLET Note: Unplug electrical cord before installing water hose. ▪ If not installed, install rubber washer in one end of cold water. ▪ Thread COLD water hose onto the BLUE connection (right side). NOTE: Only the cold valve will be connected for this installation. Hot valve should NOT be connected.
DRAIN HOSE EXTENSION WH49X316 DRAIN HOSE EXTENSION KIT FOR COMBO • Flex tubing adapter to extend drain hose from Combo to standpipe. Use to extend the drain hose for discharge heights between 60” and 90”. • Parts in Kit: Extension Hose, screw clamp, hose adapter, sleeve, instruction sheet • Dimensions: 66" long by 1” diameter. 1. Unplug and move washer to gain access to drain hose. 2. With the washer moved out and hose still attached to the washer, insert the sleeve at the rubber end of the drain hose. 3.
FLOOR PAN PM7X2 LOW PROFILE FLOOR PAN WITH DRAIN / WHITE • Low profile tray perfectly fits the Combo with or without riser attached. • PVC connector included and easily attaches to floor drain for added protection • Dimensions: 29" x 33" interior (31" x 35" exterior) 1.64" deep • Drain location is 1.75” from edge of tray. Drain exit fitting mates to a 1-1.5” PVC pipe. 1. Remove the floor pan from the packaging. 2. Place it in the final installation location and attach the drain fittings if so desired. 3.
1’ HOSE SPLITTER 2 WAY WX14X10014 SHORT HOSE with Y-ADAPTER (2 NEEDED) • Provides ability to split either the HOT or COLD water supplies. Two kits requires for this installation. • Kit includes: 1’ stainless steel hose, y-adapter with male threaded connections, two rubber washers. Compatible with rubber or stainless steel hoses. x2 1. Remove the hose from the pack and install the rubber washers in each end. Install the top end of the y-adapter onto one end of the hose. 2.
240V PLUG CONVERTER GFAPC120V 4-PRONG 240V TO 110V PLUG ADAPTER • 4 prong 240V plug converter for two 110V outlets • 14-30P plug, with QVNU2 supplementary protection • Intended for use with electric 110V 15 A Combo • One alternative to the GFAPC120V part (available late 2023) is: ONETAC 1.5FT NEMA 14-30P 4-PRONG 240V TO 120V 20AMP POWER CORD ADAPTER W/ CURRENT PROTECTOR 1. Confirm that your 240V outlet is functioning properly and is compatible with a 4 prong NEMA plug. 2.
GE Profile UltraFast Combo with Ventless Heat Pump Technology Washer/Dryer PFQ97HSPVDS Wash + Dry in 1 machine For more information www.geappliances.com/ge/connected-appliances/ultrafast-2-in-1-washer-dryer-combo GE Appliances 4000 Buechel Bank Road Louisville, KY 40225 800-GE-CARES www.geappliances.
