Specification Sheet

GE LED Countdown Pedestrian Signals
16 x 18 inch module
Mechanical Outline and Jumper Module
Dimensions in inches. (mm) indicates metric equivalent
Operating Specifications
Parameter Rating
Operating Temperature Range* -40 to +74°C (-40 to +165°F)
Operating Voltage Range 80 to 135 V (60Hz AC)
Power Factor (PF) > 90 %
Total Harmonic Distortion (THD) < 20 %
Voltage Turn-Off (VTO) 35 V
Start-up Time < 75msec
Lens & Shell Material UV Stabilized Polycarbonate
Wiring
20 AWG, Color Coded
with Strain Relief
LED Color
Hand: Portland Orange
Person: Lunar White
Countdown: Portland Orange
Default Mode Hand only
*
Performed in compliance with ITE test method described in the technical notes
Design Compliance
Test type Compliance
Luminous intensity, ITE PTCSI LED Signal Modules
Uniformity & Viewing Angles version of August 2010
Chromaticity ITE PTCSI LED Signal Modules
version of August 2010
MIL-STD-810F
Moisture Resistance
Procedure 1, Rain & Blowing Rain
Mechanical Vibration MIL-STD-883 Test Method 2007
Electronic Noise FCC Title 47 Sec 15 Sub. B
1
Sec. 2.1.6 NEMA TS 2-2003
Transient Voltage Protection
Sec. 2.1.8 NEMA TS 2-2003
Controller Compatibility NEMA TS-2-2003
Sec. 8.2 IEC 1000-4-5 & Sec. 6.1.2 ANSI/IEEE
Transient C62.41.2 - 2002, 3KV, 2 Ω
Suppression Sec. 8.0 IEC 1000-4-12 & Sec. 6.1.1 ANSI/IEEE
C62.41.2 - 2002, 6KV, 30 Ω
Wiring NFPA 70, National Electric Code
Digits
MUTCD 2003, Section 4E.07, Countdown
Numbers Minimum 9’’ Height & 7’’ Width
1
Class A
Product Information
Minimum Luminous
Dimensions Symbol AC Voltage Power (W) Beam Pattern Intensity Cd/m
2
Model Number Dimensions Layout Hand Person Nominal Hand Person Countdown Degrees Hand/Digit Person
PS7-CFF1-27A-J
2
16 x 18 in Overlay Full Full 120V - 60Hz 11 7 6 26 1400 2200
Countdown
1
Class A.
2
Full MUTCD Compliance
Test Condition : T
a
= 25˚C. All values are design or typical values when measured under laboratory conditions.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2013 GE Lighting Solutions, LLC.
Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
TRAF272-R102113
3.8"
(96)
13.9"
(354)
17.7"
(449)
16.0"
(406)
17.7"
(449)
16.0"
(406)
DISCONNECT
TO DISABLE
17.7"
(449)
16.0"
(406)
CONNECT
TO TEST