Specification Sheet

GT1
TM
LED Pedestrian Signals
• 12 inch module
Mechanical Outline
Dimensions in inches. (mm) indicates metric equivalent
Operating Specifications
Parameter Rating
Operating Temperature Range* -40 to +74°C (-40 to +165°F)
Operating Voltage Range 80 to 135 V (60Hz AC)
Power Factor (PF) > 90 %
Total Harmonic Distortion (THD) < 20 %
Voltage Turn-Off (VTO) 35 V
Start-up Time < 75msec
Lens & Shell Material UV Stabilized Polycarbonate
Wiring
16 AWG, Color Coded
with Strain Relief
LED Color
Hand: Portland Orange
Person: Lunar White
Test Condition: T
a
= 25ºC. All values are design or typical values when measured under laboratory conditions.
1
Class A
2
CSA approved
Distributed by:
Product Information
Model Number Dimensions Symbol AC Voltage Power (W)
1
Beam Pattern Mechanical
Nominal Degrees Outline
PS6-WFM3-26A 12 in x 12 in Full Person 120V - 60Hz 5 26 2 and 3
PS6-PFH1-26A 12 in x 12 in Full Hand 120V - 60Hz 5 26 1 and 3
PS6-CFL1-26A 12 in x 12 in Full Person / Full Hand / Overlay 120V - 60Hz 5 26 4 and 6
PS6-PFD1-26A 12 in x 12 in Countdown 120V - 60Hz 5 26 5 and 6
PS6-PFD1-26A-H3
2
12 in x 12 in Countdown Full/Half Cycle Jumper 120V - 60Hz 5 26 5 and 6
Design Compliance
Test type Compliance
ITE PTCSI LED Signal Modules
Luminous Intensity
Version dated August 2010
Chromaticity
ITE PTCSI LED Signal Modules
Version dated August 2010
Moisture Resistance
Blown Wind Rain MIL-STD-810F
Test Method 506.4, Procedure 1
Mechanical Vibration MIL-STD-883 Method 2007
Electronic Noise FCC Title 47 Sec 15 Sub. B
1
Transient Voltage Protection
ITE PTCSI LED Signal Modules
Version dated August 2010
Controller Compatibility Nema TS-2-2003
Wiring NFPA 70, National Electric Code
Digits
MUTCD 2003, Section 4E.07, Countdown
Numbers Minimum 9” Height & 7” Width
* Performed in compliance with ITE test method described in the technical notes
3.3"
(82)
3.9"
(100)
0.25"
(6.4)
10.4"
(264)
10.9"
(276)
5.8"
(147)
10.8"
(275)
1.7"
(40)
11.9"
(304)
11.9"
(304)
11.9"
(304)
11.9"
(304)
11.9"
(304)
11.9"
(304)
11.9"
(304)
11.9"
(304)
1 2 3 4 5 6
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. GT1 and “The Greatest Signals Stand the Test of Time” are trademarks of GE Lighting Solutions, LLC. The GE brand and logo are trademarks
of the General Electric Company. © 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
TRAF012-R050913