Specification Sheet

GT1
TM
LED Pedestrian Signals
• 16 x 18 inch module
Mechanical Outline
Dimensions in inches. (mm) indicates metric equivalent
3.8"
(96)
17.7"
(449)
16.0"
(406)
13.9"
(354)
17.7"
(449)
16.0"
(406)
3.8"
(96)
17.7"
(449)
16.0"
(406)
13.9"
(354)
17.7"
(449)
16.0"
(406)
3.8"
(96)
17.7"
(449)
16.0"
(406)
13.9"
(354)
17.7"
(449)
16.0"
(406)
Design Compliance
Test type Compliance
Luminous intensity, ITE PTCSI LED Signal Modules
Uniformity & Viewing Angles version of August 2010
Chromaticity ITE PTCSI LED Signal Modules
version of August 2010
MIL-STD-810F
Moisture Resistance
Procedure 1, Rain & Blowing Rain
Mechanical Vibration MIL-STD-883 Test Method 2007
Electronic Noise FCC Title 47 Sec 15 Sub. B
1
Sec. 2.1.6 NEMA TS 2-2003
Transient Voltage Protection
Sec. 2.1.8 NEMA TS 2-2003
Controller Compatibility NEMA TS-2-2003
Sec. 8.2 IEC 1000-4-5 & Sec. 6.1.2 ANSI/IEEE
Transient C62.41.2 - 2002, 3KV, 2 Ω
Suppression Sec. 8.0 IEC 1000-4-12 & Sec. 6.1.1 ANSI/IEEE
C62.41.2 - 2002, 6KV, 30 Ω
Wiring NFPA 70, National Electric Code
Digits
MUTCD 2003, Section 4E.07, Countdown
Numbers Minimum 9’’ Height & 7’’ Width
Operating Specifications
Parameter Rating
Operating Temperature Range* -40 to +74°C (-40 to +165°F)
Operating Voltage Range 80 to 135 V (60Hz AC)
Power Factor (PF) > 90 %
Total Harmonic Distortion (THD) < 20 %
Voltage Turn-Off (VTO) 35 V
Start-up Time < 75msec
Lens & Shell Material UV Stabilized Polycarbonate
Wiring
16 AWG, Color Coded
with Strain Relief
LED Color
Hand: Portland Orange
Person: Lunar White
Countdown: Portland Orange
Default Mode Hand only
* Performed in compliance with ITE test method described in the technical notes
Product Information
Minimum Luminous
Dimensions Symbol AC Voltage Power (W) Beam Pattern Intensity Cd/m
2
Model Number Dimensions Layout Hand Person Nominal Hand Person Countdown Degrees Hand/Digit Person
PS7-CFF1-26A
2
16 x 18 in Overlay Full Full 120V - 60Hz 11 8 6 26 1400 2200
Countdown
1
Class A.
2
Full MUTCD Compliance
Test Condition : T
a
= 25˚C. All values are design or typical values when measured under laboratory conditions.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. GT1 and “The Greatest Signals Stand the Test of Time” are trademarks of GE Lighting Solutions, LLC. The GE brand and logo are trademarks
of the General Electric Company. © 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
TRAF014-R050913