Use and Care Manual

49-2000996 Rev. 2 29
TROUBLESHOOTING TIPS
Troubleshooting Tips ... Before you call for service
Problem Possible Cause What To Do
Oven will not stay set. Function error. Disconnect all power for at least 30 seconds and then reconnect
power. If repeating, call for service.
Water remaining on oven
floor after Steam Clean cycle
This is normal. Remove any remaining water with a dry cloth or sponge.
Oven will not work remotely Router issues, no wireless signal, etc. For assistance with oven wireless network connectivity, please
call 1-800-220-6899.
Oven is not connected.
Remote enable is off Turn remote enable on (see Special Features section of this
manual)