Specification

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
P2S930SELSS
GE Profile
™
Series 30" Dual Fuel Slide-In Front Control Range
with Warming Drawer
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/19
ELECTRICAL REQUIREMENTS: 240v/208v; 60Hz, 40A
INSTALL ATION INFORMATION: Before installing, consult
installation instructions packed with product for current
dimensional data.
For all installations, install the required rear trim to back of
range with 4 screws provided.
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
5t
5t
5
5t
5
Wall-Mounted
30" min
Side Wall
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
18"
minimum
to cabinet
above counter
30"
Recommended
2 1/4"
24"
30"
2"
3"
9"
7"
8"
7 1/2"
36"
16"
max to
cabinets
above
counter
Gas
supply
electrical
supply
P2S930
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
5t
5t
5
5t
5
Wall-Mounted
30" min
Side Wall
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
18"
minimum
to cabinet
above counter
30"
Recommended
2 1/4"
24"
30"
2"
3"
9"
7"
8"
7 1/2"
36"
16"
max to
cabinets
above
counter
Gas
supply
electrical
supply
P2S930
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
ADA
COMPLIANT