Installation and Maintenance Manual

GEI-M1031-B
3
I. GENERAL INFORMATION
A. How to Properly use this Instruction Manual
This manual has been written to assist the user with proper procedures when handling, installing, operating
and maintaining the equipment. All of the safety warnings and instructions in this book must be followed to
prevent injury to personnel.
The installation and maintenance manual must be kept for future reference during installation, operation and
maintenance.
B. Safety Symbol Legend
Below is a safety symbol table that identifies the safety symbols that appear in this manual
and on the equipment.
The use of a lightning bolt within an
arrowhead symbol, enclosed in a
yellow triangle, indicates warning of
dangerous electrical voltage that could
cause an electric shock to a person.
The use of an exclamation point within
a yellow triangle indicates to the user
that important installation operating
and maintenance instructions must be
followed.
This symbol identifies any terminal
which is intended for connection to
an external grounding conductor for
protection against electric shock in
case of a fault.
The use of a small case “i” enclosed
in a square indicates a general note.
CAUTION:
Indicates a procedure or condition
that, if not strictly observed, could
result in minor injuries to personnel.
WARNING:
Indicates a procedure or condition
that, if not strictly observed, could
result in personal injuries or death.