Brochure

GE Inspection Technologies

Xray

GEInspectionTechnologies.

Tube Shutter Timer

The equipment has two independent, programmable timers with a non-volatile memory. A total of four timers can be supplied if

required. Depending on the number of timers it is possible to time-control one to two or one to four window shutter elements.

Preselection and setting hours from 0 to 99, minutes from 0 to 59, seconds from 0 to 59

digital setting individually for 1 to 2(4) window shutter elements

Set point value display digital, 6 digits

Actual value display digital, 6 digits

Technology

20 kHz IGBT technology for high voltage circuit and ﬁlament current circuit

Emitted interference as per EN 55011A, Class A

Immunity to interference as per IEC 801-2/1991, 801-3/1984, 801-4/1988

Connected Loads and Mechanical Dimensions

Power connection 1/N~ 230 V ± 10%, 50/60 Hz

Power consumption 4150 W at 60 kV, 58 mA

Max. mains current 24 A

Mains fuse 32 A (as per VDE)

Ground terminal 6 mm² Cu

Type of protection as per EN 60529, IP00 (rack mount), IP32 (desk-top)

Cooling water connection 3/4 inch

Cooling water consumption minimum 3.5 l/min, minimum 4.5 bar, maximum 7 bar,

at outlet point pressure-free

Cooling water temperature > dew point < 35° C

Dimensions overall 483 mm x 266 mm x 680 mm (WxHxD), 19” (48 cm) rack mount

Weight approximately 57 kg

We reserve the right to technical modifications without prior notice.

GEIT-30095GB (5/04)