Brochure

ManualsBrandsGE ManualsAnalytical X-ray (XRD)GE Modules

GE Inspection Technologies

Xray

Highlystabilized X-Ray equipment ISO-DEBYEFLEX 3003

for structure analysis

Features

• High stability of voltage and current through modern power electronics

• Voltage divider for exact high voltage measurements

• Proven medium-frequency converter technology

• High user comfort through microprocessor technology

• SMD technology

• Automatic warm-up program (real time clock)

• Possibility of integration into existent systems

(via RS232C-Interface)

• Fail-safe circuit for “X-RAY ON” lamp

• Produced under ISO 9001 certiﬁed quality

management system

• CE conformity

SEIFERT ID 3003

Summary of content (4 pages)

PAGE 1
Xray GE Inspection Technologies SEIFERT ID 3003 Highlystabilized X-Ray equipment ISO-DEBYEFLEX 3003 for structure analysis Features • High stability of voltage and current through modern power electronics • Voltage divider for exact high voltage measurements • Possibility of integration into existent systems (via RS232C-Interface) • Proven medium-frequency converter technology • Fail-safe circuit for “X-RAY ON” lamp • High user comfort through microprocessor technology • Produced under ISO 9001 ce
PAGE 2
GE Inspection Technologies General Warm-Up Program When the direct voltage X-ray equipment of the type ISO-DEBYEFLEX was introduced in 1950 for structure analysis it set standards in X-ray generator technology from the very beginning.
PAGE 3
Xray The basic conﬁguration comprises Extensions - Basic equipment ID 3003 as 19” chassis with integrated high voltage generator - Tubehousing V 4 with X-ray tubes as per individual choice and respective separate speciﬁcations - Cooling water checking device - High voltage cable, standard length 2 m (maximum 20 m) - 1 Water hose (ID 3003 - Tubehousing), standard length 2 m - 2 Water hoses (inlet hose, outlet hose), standard length 5 m each (maximum 20 m *) - Computer interface RS 232 C Sockets for
PAGE 4
Xray GE Inspection Technologies Tube Shutter Timer The equipment has two independent, programmable timers with a non-volatile memory. A total of four timers can be supplied if required. Depending on the number of timers it is possible to time-control one to two or one to four window shutter elements.